150A 6 Port Power Distribution Board with 1-to-6 XT60 Connector Power Distributor PDB Module for RC Car/Submarine/Robot (XT60 XT60-6)

XT60 1-to-6 Power Distribution Board 6-Channel Output Max 150A Hight Current PDB DIY Modification Parts for RC Models/Robots Parameter Notice: Application: Designed for RC cars, submarines and robots only. NOT compatible with FPV drones. Safety Warning: High voltage & high current device. Do not overload or reverse positive and negative poles to prevent burnout. Interface Note:Comes with standard XT60 connectors. Please check your device interface and mounting size before Dimensions: 80x28.9x24mm(3.15x1.14x0.94inch) (with bottom case), 78x25x20mm(3.07x0.98x0.79inch) (without bottom case) Weight: about 45.1g (with bottom case), 37.5g (without bottom case) 2 types for your refer: XT60 XT60-6: XT60 to 6-channel XT60 PDB XT60 XT60-6 w base: XT60 to 6-channel XT60 PDB, with bottom base

• ● Input interface: XT60 (recommended DC voltage: 0-100V)
• ● The XT60 "1-to-6 power distribution board" splits the input voltage into 6 outputs, suitable for DC power distribution scenarios (e.g:robots,RC aircraft,RC cars,submarines,electric vehicles).
• ● Output interface: 6 XT60 ports
• ● Load current: Max 150A
• ● Total max current: 150A, each port with current limit. DC 0-100V withstand voltage only, no voltage regulation. No built-in BEC
• ● Check voltage and current specs before ordering to avoid damage from overloading.
• Improtant 2:Do not reverse the positive and negative poles during wiring, otherwise it may cause short circuit or burnout.
• Improtant 3:Ensure all welding points are firm to prevent poor contact or overheating.